What Mopar Oil Filter Fits the 5.7 HEMI? A Complete Guide

The 5.7L HEMI V8 engine is one of Chrysler’s most iconic powerplants, known for its performance, durability, and aggressive sound. Found in vehicles like the Ram 1500, Dodge Charger, Challenger, Durango, and Jeep Grand Cherokee, this engine delivers serious horsepower and torque. But to keep it running strong, routine maintenance is key—especially oil changes.

One critical component often overlooked is the oil filter. If you're wondering what Mopar oil filter fits the 5.7 HEMI, you're in the right place. In this guide, we'll explore the right OEM filter, why it matters, and how to choose the best fit for your HEMI-powered vehicle.

Why the Right Oil Filter Matters for Your 5.7 HEMI

The oil filter plays a crucial role in protecting your HEMI engine. It removes contaminants, dirt, and microscopic metal particles from the engine oil before it circulates through critical components. Just like the Mopar fuel filter for 6.7 Cummins ensures clean diesel for optimal performance, using the right oil filter is essential to keep your engine running smoothly and efficiently.

A poor-quality filter can:

• Allow debris to damage engine internals
  
  

• Restrict oil flow, causing poor lubrication
  
  

• Shorten the life of your engine
  
  

That’s why using an OEM Mopar oil filter ensures your engine receives the protection it needs, especially under high loads or aggressive driving.

Recommended Mopar Oil Filter for 5.7 HEMI: Mopar MO-899 / 04892339AB

The Mopar MO-899 (part number 04892339AB) is the most widely recommended OEM oil filter for most 5.7L HEMI engines.

Key Features:

• High-efficiency filtration media
  
  

• Bypass valve to prevent oil starvation
  
  

• Heavy-duty housing to withstand pressure
  
  

• OEM fitment and Chrysler engineering standards
  
  

This filter is commonly used across a wide range of 5.7 HEMI-equipped models from 2009 to current production years. It delivers consistent oil flow and is engineered to match the factory oil change intervals and engine specs.

Which Vehicles Use the 5.7 HEMI Engine?

To ensure you’re using the correct filter, it's important to confirm your vehicle uses the 5.7L HEMI V8. Here are some common models equipped with this engine:

• Ram 1500 / 2500 (various trims)
  
  

• Dodge Charger R/T
  
  

• Dodge Challenger R/T and Scat Pack
  
  

• Dodge Durango R/T
  
  

• Jeep Grand Cherokee 5.7L models
  
  

• Chrysler 300C
  
  

Most of these vehicles use the Mopar MO-899, but it’s always smart to verify with your VIN or owner’s manual, especially if your vehicle falls outside standard production years.

Mopar vs Aftermarket Oil Filters

While many aftermarket oil filters are available for the 5.7 HEMI, sticking with Mopar oil filters offers distinct advantages:

OEM Quality Assurance

Mopar filters are manufactured to Chrysler’s exact specifications, ensuring optimal oil flow and debris capture.

Warranty Compliance

Using genuine Mopar parts can help you maintain your vehicle’s factory warranty, whereas non-OEM filters may create coverage issues.

Engine Longevity

Proper filtration ensures minimal wear on engine bearings, camshafts, and piston rings—especially in performance engines like the 5.7 HEMI.

Oil Change Intervals for the 5.7 HEMI

Most modern 5.7 HEMI vehicles equipped with synthetic oil require an oil change approximately every 6,000 to 8,000 miles, or as indicated by your oil life monitoring system. Some drivers who tow, off-road, or drive aggressively may need to service the engine more frequently.

Always replace the oil filter during each oil change and use 5W-20 or 0W-20 synthetic oil, depending on your vehicle's specifications.

DIY Oil Filter Replacement Tips

If you're planning to change your oil filter at home, follow these best practices:

1. Warm the engine to help drain the oil faster.
   
   

2. Use an oil filter wrench to remove the old filter.
   
   

3. Check the old filter to ensure the gasket came off.
   
   

4. Lightly coat the new filter gasket with fresh oil.
   
   

5. Tighten the new Mopar oil filter hand-tight (or per torque spec).
   
   

6. Refill the engine with the correct grade of oil.
   
   

Don’t forget to properly dispose of used oil and filters at your local recycling center or auto parts store.

Final Thoughts

Choosing the right oil filter is a simple but vital step in protecting your 5.7L HEMI engine. The Mopar MO-899 (04892339AB) offers OEM reliability, proper fitment, and high filtration efficiency for everything from daily commuting to high-performance driving.

Whether you're driving a Dodge Challenger, Ram 1500, or Jeep Grand Cherokee, using the correct Mopar oil filter helps ensure your HEMI engine continues to deliver the power and performance it was built for.

Frequently Asked Questions (FAQs)

1. What is the correct Mopar oil filter for a 5.7 HEMI?

The recommended Mopar oil filter is MO-899 (part number 04892339AB) for most 5.7 HEMI engines from 2009 and newer.

2. Can I use a different brand of oil filter on my 5.7 HEMI?

You can, but it’s best to use OEM Mopar filters to ensure proper fit, performance, and warranty protection.

3. How often should I change the oil and filter on my 5.7 HEMI?

Every 6,000 to 8,000 miles or as indicated by the vehicle’s oil monitoring system. Always replace the filter during oil changes.

4. What kind of oil should I use with the 5.7 HEMI?

Use 5W-20 or 0W-20 full synthetic oil, depending on your model year and manufacturer’s recommendation.

5. Is the Mopar MO-899 filter good for performance driving?

Yes. It’s designed for high-pressure and high-temperature environments, making it ideal for towing and spirited driving.